Of all the things I have shared I feel my method of cutaway transfer is the absolute niftiest. If I want to transfer a design or image to a fabric with texture (velvet, linen, lace, etc) or a fabric that has a prominent print or fabric that is too special to make any mark on, I ALWAYS use this method and apply it to the BACK of the fabric. There is already a tutorial on this blog but I will go though the steps once again...
Since I work from the back of the fabric I need a reverse image of my design. Then I apply an iron-on interfacing to the back of the fabric. I mark my image into sections.
I then cut out the reverse image I want to transfer and lay it on the interfacing and trace around the whole image.
Please note:With birds I do not cut out the beak. I always apply the beak at the very last.
Then I start cutting off the smallest outside bits.... in this case the top of the head and the tail. Then I place the image back on the interfacing and make a line where I cut away.
I just keep cutting away bits and marking where I cut.
Eventually I was down to the wing which was the last part to cut up.
You can see what is left of the paper image as I cut it all up into small bits.
Then I do some basting with a contrasting thread on the lines...
And when I turn it over I have my bird on this velour fabric. There are no marks or chalk or tissue paper to deal with and the basting stitches are easy to remove as I go along. You would be amazed how easily and quickly you can transfer even very complex images this way.
So I have gathered my metallic gold threads and sorted them from light to dark and will soon show you how I start the stitching.